Swords symbolize an edge, and the sword display case was named "EDGE" to represent the intention to create new perspectives and values and to make new inroads in these areas.
 This unique sword display case was created in collaboration with a product designer and features a combination of many slanted surfaces. Of course, functionality was also taken into consideration, and it was designed to prevent reflections and dust from being noticeable on the panels.


 There are three types of models: a standard model with a black base, a Nishijin-ori model with Nishijin-ori fabric sandwiched between acrylic, and a Washi model with Washi paper sandwiched between acrylic.


 *Sword and sword mount not included
 *The design may be changed without notice due to improvements, etc.




 ■Features
・Can be hung on the wall (the installation method is the same as for the "Sword Box" and the wall hanging procedure can be found here )
・You can display swords, wakizashi, and mountings with a total length of 125cm or less.
 - We use high color rendering LEDs, similar to those used in museums, so you can enjoy viewing the swords in soft light, which is less likely to strain your eyes.
 - The front door can be locked at one point at the top to prevent theft and provide peace of mind even if you have small children or pets.


 - The included spotlight (6500K, white) can be dimmed using the remote control.


 The front panel is anti-reflective, reducing glare and allowing for stress-free viewing and photography of swords. To clean fingerprints or other dirt, please use the designated camera lens cleaner (available on Amazon).


 - Blocks 99% of UV rays in the 300-380nm range that are harmful to art pieces.


・High earthquake resistance
 When earthquake resistance tests were conducted assuming the sword would be hung on a wall, it was found that it could be stored without damage to the blade even in four earthquakes of magnitude 6+ and 7: the Great Hanshin-Awaji Earthquake, the Kumamoto Earthquake, the Niigata Chuetsu Earthquake, and the Nankai Trough (anticipated).
 The final video shows a reproduction of the Niigata Chuetsu earthquake. ( Click here for details of the experiment.)
 (*The results are based on experiments only and do not guarantee protection from actual earthquakes. Please use them for reference only.)
 The video shows the Tabletop Sword Box 2.0, but since the materials used for the sword hanger are similar, we believe that similar results will be obtained.


 -There is also a " Nishijin-ori model " with Nishijin-ori sandwiched between acrylic, and a " Washi model " with Japanese paper sandwiched between acrylic.


 - The black cloth on the back is made of " Taikyomon ", which absorbs 99.9% of light, allowing you to take beautiful photos of the blade and mounting.




  ■Product Information 
・Dimensions (width x height x depth / unit: mm) 
 
   〇Product external dimensions
  1300×500×306
 
  〇Exhibition interior dimensions
  1290×385×197
 
・LED light
 6500K (white) 30° light distribution angle: 6
 Weight: Approximately 40 kg
  Compatible with 100-240V (1.5m cable length, cord comes out from the center of the back of the case)


 ·material
 Frame: Steel plate (iron)
 Backboard: Taikokumon
 Base: Acrylic (Nishijin-ori model is acrylic sandwiched between Nishijin-ori, Washi model is Washi paper sandwiched between)
  Sword holder: Aluminum (anodized) with low-resilience waterproof sponge
 Front door: Acrylic with anti-reflective film
 Side panel: Acrylic


 - Compliant with the Electrical Appliance and Material Safety Act (PSE)
 ■Usage environment
・Japan and overseas (100-240V power supply only)
 (If you are using it outside of Japan, you will need a separate adapter plug. Please prepare this separately.)
  - For indoor use only (to protect exhibits, please use within the room temperature range of 15 to 30°C and humidity of 40 to 60%)
・To protect the exhibits, please avoid placing them in direct sunlight or near windows where condensation is likely to occur.
 
 ■Notes
・This product is entirely handmade. There are some welded areas, so there may be slight distortions, scratches, or dents. (This will not affect the product's usability.)


 -When installing the product on a wall, be sure to check in advance that the wall can withstand a weight of 50 kg.
 (We cannot guarantee against damage to the wall when installing the product, or any damage to the product or exhibits that may result from this.)


・I am not a professional wall installer, and it is difficult for me to assess the condition of the walls in your home (whether they are durable enough), so I generally do not offer on-site installation. Installation on the wall is at the customer's own risk.
・If you are sending outside of Japan, you will be responsible for additional shipping and customs fees. Shipping costs will be quoted individually. Please contact us for more information.
 (Customs fees are determined by local customs officials, so we cannot answer in advance.)


・Please check the terms of use before purchasing. (You can find them on the purchase page.)
 By purchasing, you agree to the terms of use.