This is a display case for short swords that can be displayed on a desk or wall, allowing you to enjoy viewing swords like in a museum.
 *Dantou and sword mounting are not included.
 *There are two types available: one-tier and two-tier, and you can choose either one.
 *The design may be changed without notice due to improvements, etc.

・The production diary of the tabletop dagger box is here↓
 Improvement status of the "Tabletop Tanto Box" ① | Sword Box Maker's Japanese Sword Blog Keisuke Nakamura | note


 ■Features
・Danto and wakizashi with a total length of 58cm or less can be displayed.
 [For single-tier type]
 The sword fittings can be displayed as long as they are 7.5cm in tsuba diameter and 58cm in total length or less.

 [For two-tier type]
 Shirasaya and koshirae (tsuba diameter 6cm or less) with a total length of 58cm or less can be exhibited.
 *Koshirae with a tsuba diameter of up to 58mm can only be displayed on the upper level. Aikuchi koshirae without a tsuba or shirasaya can be displayed on either the upper or lower level.
 *If you display the blade on the top shelf, it will be difficult to get light on it, so we recommend displaying the blade on the bottom shelf.


 - The front door can be locked to prevent theft and is safe for small children and pets.

 - Humidity control material included to protect the sword from sudden changes in humidity.
 (Humidity-regulating materials only play a supporting role. They do not automatically regulate humidity, so if the humidity exceeds 60%, you should use air conditioning in the room to dehumidify it. When displaying koshirae, a humidity level of 40-60% is ideal.)

 The included spotlight (3000K, orange) can illuminate any position in 360° and can be dimmed using the remote control.

 The front panel is anti-reflective, reducing glare and allowing for stress-free viewing and photography of swords. To clean fingerprints or other dirt, please use the designated camera lens cleaner (available for purchase here ).

 - Blocks 99% of UV rays in the 300-380nm range that are harmful to art pieces.

・High earthquake resistance
 When earthquake resistance tests were conducted assuming the sword would be hung on a wall, it was found that it could be stored without damage to the blade even in four earthquakes of magnitude 6+ and 7: the Great Hanshin-Awaji Earthquake, the Kumamoto Earthquake, the Niigata Chuetsu Earthquake, and the Nankai Trough (anticipated).
 The final video shows a reproduction of the Niigata Chuetsu earthquake. ( Click here for details of the experiment.)
 (*The results are based on experiments only and do not guarantee protection from actual earthquakes. Please use them for reference only.)
 The video shows the Tabletop Sword Box 2.0, but since the materials used for the sword hanger are similar, we believe that similar results will be obtained.

・As an option, the base can be finished with "gold lacquer." This will add even more beauty to the sword. Please see the many photos below for an image of the display.
 https://note.com/katana_case_shi/n/n034b3a396cf3


 ■ Delivery time
 Since we start production after receiving your order, it will take approximately 1-2 months from the time we confirm your payment until delivery.
 For foil lacquer finishes, it will take approximately 2 to 3 months.
 *This does not apply if we are busy with orders. In that case, we will contact you separately.



 ■Product Information
・Product external dimensions
 W600×H270×D157

・Spacing of sword holders
 220mm

・Storage box
 None (There is space under the base to put humidity control material)

 Weight: Approximately 6 kg (excluding sword)

 ·material
 Frame: Steel plate (iron)
 Backboard: PC (polycarbonate) with wallpaper attached
 Base: Wallpaper pasted on steel plate (foil lacquer finish is acrylic with foil lacquer)
 Sword holder: Aluminum (black anodized) with sponge
 Front door: Anti-reflective acrylic (acrylic with almost no reflection)


 ■Accessories
・1 set of humidity control material (2 pieces)


 ■Usage environment
 - Japan and overseas (operating voltage 100-240V). Please use an adapter plug when using overseas.
 - For indoor use only (to protect exhibits, please use within the room temperature range of 15 to 30°C and humidity of 40 to 60%)
・To protect the exhibits, please avoid placing them in direct sunlight or near windows where condensation is likely to occur.


 ■Notes
・This product is entirely handmade. There are some welded areas, so there is a possibility of minor distortion, scratches, or dents. (This does not affect use, but if this is a concern, please refrain from purchasing.)

 -If you are sending outside of Japan, you will be responsible for additional shipping and customs fees.
 (Customs fees are determined by local customs officials, so we cannot answer in advance.)

・Please check the terms of use before purchasing. (You can find them on the purchase page.)
 By purchasing, you agree to the terms of use.